Showing posts with label dts. Show all posts
Showing posts with label dts. Show all posts

Friday, July 20, 2012

Sony STR-DH800 7.1-Channel Audio Video Receiver (Black) Review

Sony STR-DH800 7.1-Channel Audio Video Receiver (Black)
Average Reviews:

(More customer reviews)
I know just enough about Audio to be dangerous but I'm not a true audiophile (or whatever they're called). So I don't know how an average person would figure this out when it took me an hour and a half on the phone with Sony support before THEY figured it out.
Now this is my second Sony receiver and I purchased this one specifically to go along with my brand new Sony BDP-S360 Blu Ray player. I used brand new HDMI category 2 cables into the receiver and then out to my Sony HDTV. This is suppossed to be the BEST way to get true no-loss sound decoding and picture. Well I was shocked when my receiver was NOT decoding DTS audio. All Dolby Digital tracks were playing in perfect 5.1 surround sound...the DTS tracks played back in Linear PCM stereo. So after I read the manuals, updated the firmware and set everything right then trying a few DVDs and Blu Ray discs I contacted Sony Support via email. Several exchanges later they asked me to call in to better troubleshoot my issue. First I talked to the blu ray guy (since I wasn't sure which device was causing the issue) and after resetting the player and checking all the setting I was transfered to the Audio department. Once again we reset the machine to factory setting, checked all the set ups and still nothing changed (Did I mention that I had to unhook and reconnect several cables and I even had an optical cable running to my old Sony Reciever?). Then 1 1/2 hours into the phone call he asked if I was getting audio through the TV speakers which I was and he said "oh its set to TV + Amp". So we changed that setting to just "Amp" and bingo...DTS surround sound!! I said "but that's the factory default setting". He told me where the info was in the manual but I checked an NOWHERE in the manual does it say that when using the receiver as a passthrough via HDMI inorder to decode a DTS signal the receiver must be set to "Amp" only and not the default setting of "TV + Amp". What the...??
So now the receiver works great even decoding the new DTS-HD Master Audio off my "Watchmen" Blu Ray disc. But be warned that if you use the HDMI inputs to decode your surround sound be sure to change the system to "Amp" instead of the default "TV + Amp" unless you enjoy stereo sound from your suround sound system. This may be the case for other Sony receivers so be aware when buying that factory default setting may not allow for optimum performance and the Sony guys might not be aware of this little fact if you call them.

Click Here to see more reviews about: Sony STR-DH800 7.1-Channel Audio Video Receiver (Black)

The STR-DH800 7.1 Channel A/V Receiver delivers the Full HD 1080 experience to a home theater system. This newly designed 1080p A/V Receiver features 7 HD inputs including 4 HDMI inputs with "Active Intelligence" that allow the desire for more HD content to grow. In addition, the STR-DH800 is compatible with 24p True Cinema technology video signals and decodes uncompressed audio formats (Dolby TrueHD/dts Master Audio/LPCM via HDMI) making it compatible with Blu-ray DiscPlayers , the PlayStation 3 Technology and other HD sources. Simply plug in the optional S-Air transmitter and turn on the AirStation client (sold separately) and listen to your favorite music in another room or in multiple rooms.

Buy Now

Click here for more information about Sony STR-DH800 7.1-Channel Audio Video Receiver (Black)

Thursday, June 28, 2012

Popcorn Hour C-200 Networked Media Tank (Black) Review

Popcorn Hour C-200 Networked Media Tank (Black)
Average Reviews:

(More customer reviews)
BUYER BEWARE!!! I bought the C-200 back in December 2009, it worked well for a while but died in August 2010, I had to send it back to popconhour for a new motherboard :( The device does play everything you throw at it and is faily versatile in that it can take an optional bluray drive and more internal store etc. Unfortunately it is an ugly addition to a home theatre setup. There is no offical support that I can see, most of the problems people have with playback seem to be addressed with firmware updates. It is NOT worth the price, there are many alternactive devices available now which do just as good a job, WDTV, PlayOn, ASROCK ION 330 etc. Trust me, it is a hassle to keep this thing working well. The forums over on networkedmediatank shows many uswers having problems which are NEVER resolved. Best steer clear of this box and all other popcornhour devices folks.

Click Here to see more reviews about: Popcorn Hour C-200 Networked Media Tank (Black)

It's Time to Unleash Your TVThe Popcorn Hour C-200 is the most powerful and versatile Networked Media Tank yet. It’s blazing-fast processor, Blu-ray capability and storage options make the C-200 an ideal addition to your home theater or high-definition entertainment system. All Your Media in One BoxWith Popcorn Hour you can stream or playback digital media content from a variety of sources, such as your PC, network-attached storage, digital camera or USB storage (flash drive, hard disk, and DVD drive). Popcorn Hour also makes it easy to download and stream content directly from popular Internet sites like SHOUTcast™ Radio, Blip.tv, Revision 3 and dozens of others. Popcorn Hour even has a built-in download utility, eliminating the need to rely on your PC to download files from the Internet.Expand Your Possibilities• The C-200 includes the most expansion options with a total of 5 USB ports and 2 SATA ports for all your storage needs.• You can add a Blu-ray drive** to turn your Popcorn Hour C-200 into a full-featured Blu-ray player.• You can add a hard drive to create a central library of all your digital media files, ready to play on your HDTV at any time.**Requires at least 1GB storage space (USB or Hard Disk) for full playback.

Buy Now

Click here for more information about Popcorn Hour C-200 Networked Media Tank (Black)

Tuesday, May 1, 2012

Sony STR-DN1000 7.1-Channel Audio Video Receiver (Black) Review

Sony STR-DN1000 7.1-Channel Audio Video Receiver (Black)
Average Reviews:

(More customer reviews)
I bought the STR-DN1000 as an upgrade to my old Yamaha receiver that didn't have audio decoding through HDMI which I really needed since I've recently added a couple additional HDMI components to my set-up and needed HDMI switching. I bought it based on reviews of sound quality (anyone saying this amp has anything less than great sound doesn't know what they're talking about or doesn't have their amp set up correctly!), price, and features (4X HDMI being the most important). I am relatively pleased with my new receiver. Sound and video processing are both excellent, and aside from a few issues, this is a great receiver. Before I go into more detail, here is my home theater set-up:
1) 5.1 surround sound consisting of: Polk Audio TSi200 L + R speakers, a Polk CS20 Center Channel Speaker, and a Yamaha subwoofer and two Yamahah back channel L & R speakers.
4) A Sony DVP-NS700H/B DVD player
5) Toshiba 42" Regaza LCD
6) Comcast Digital Cable box
7) WD TV Live HD Media Player
All devices connected using Version 1.3 Category 2 HDMI Cables.
Setting things up:
Set-up is a breeze. Everything is laid out well enough, and the included wire-map which gives a blown-up overview of the connections makes things even easier. The wire screws for connecting the speakers are made of plastic and are not as easy to turn as I might have liked, but this was a minor issue at best. They do support Banana jacks if that's your thing. I had all my speaker wires and HDMI cables connected in about 10 minutes (all of them were already in place so it might take significantly longer if you are running new wire). Just a note for reciever set-ups: give yourself an extra 3-4 feet of wire for each speaker so you can connect your amp OUTSIDE your AV cabinet/rack. This will make things much easier because you can work on the amp with it's back facing you!
GUI (Graphic User Interface), Programing, and Auto Calibration:
The DN1000 comes with a built in GUI for adjusting settings. It is a rudimentary text based interface in black, white and blue, but it is easy to navigate and use even if it isn't pretty. I was easily able to program in radio pre-sets, assign inputs *More on that to come*, and run the Auto Calibration. Auto Calibration involves connecting a provided mic and placing it in the correct location and then letting the amp put out some test tones to each speaker and the amp. The whole thing takes about 30-40 seconds. The manual states that this will involve "very loud" sounds, so I was a bit worried what that would be like. Thankfully it wasn't loud at all, so don't get freaked out when the manual warns you to watch out for small children, dogs, and angry neighbors. The GUI could be a bit more intuitive; you are frequently required to git an 'option' button that is on the remote itself. It would have been much simpler to just have that button in the layout of the GUI itself.
Programing custom inputs and renaming inputs was my biggest complaint with this amp. First, you CANNOT re-map the TV, Satelite, DVD, etc., buttons to be linked with the HDMI inputs. Each time you re-map an input it asks for both an audio and video input. I wanted to re-map the DVD button on the remote to work with my HDMI DVD player. I was able to choose the correct HDMI in, but because the amp also requires an audio input, you are FORCED to choose from coaxial, analog LR channel or digital. Choosing any of these overrides the HDMI's sound, and gives you video but no sound! This is incredibly frustrating and very stupid on Sony's part since the amp supports HDMI sound processing natively and all they would need to do is tweak the GUI to allow the user to select either HDMI or 'None' for sound input! I called Sony tech support to verify this is the case and they said they have no plans to issue a firmware update to correct this issue. I was able to re-name the HDMI inputs to DVD, WD LIVE, and COMCAST so that the amp displays the correct input when one of the HDMI buttons is pushed, but that isn't ideal considering the layout of the remote:
The Remote:
On first glance, the remote appears to be well laid out and to have excellent built quality (no squeeks when you hit the buttons, feels nice and solid in your hand, responsive buttons, etc). It is solidly made, but functionally it has some major flaws:
1) Because there are nice big, well labeled "DVD, TV, Satelite, etc." buttons on the top third of the remote, it will be highly confusing to have to explain to non-tech savvy people "when you want to watch a DVD you hit HDMI 3, not DVD" or something similar due to the inability of the receiver to re-map those buttons! Basically the usefulness of having 'quick launch' buttons on the remote is destroyed by not being able to map them correctly!
2) The mute button location is horrible. It is at the bottom lower third of the remote on the left side. It is also the smallest button on the remote and a real pain to hit with your thumb since it requires balancing the very end of the remote in your hand or using two hands. In my opinion, the button you're most likely going to use more than any other should be easily accessible!
Sound Quality:
I put the amp through its paces with the following:
1) Comcast TV (College Football) with Dolby Digital Surround
2) Lord of the Rings: The Two Towers (DVD) & The Matrix (DVD)
3) Various lossless audio files streamed over my WD media streamer
4) Battlestar Galactica HD streamed over my WD media streamer
Surround sounds is just about perfect. Crystal clear highs, nice punch with the bass (although my sub really isn't anything to write home about) and excellent, authentic reproduction of even complex sound files like Feist and Metallica playing from a FLAC (Free Lossless Audio Codec) file. I ran through a few excellent (in my opinion) surround sound movies and all sounded fantastic. Orcs screaming from behind me, thunderous sounds of war, the steely tones of Mr. Smith threatening Neo, all sounded lovely.
Video Quality:
HDMI video pass through was great. Suffice it to say that I didn't use this receiver to decoded low-res video files (something it does, but according to other reviews not that well). The video decoder in my WD media streamer does that job. I can confirm that the receiver did not affect inherent video quality to either good or ill.
Aesthetics:
This is a slick receiver and looks great on my AV rack. It matches my DVD player which I guess is a good thing, and even (sort of) matches my Toshiba TV. The LED screen is adequate if not amazing. It is easy to read from across the room (about 12 feet in my smallish living room). Text is clear and crisp which is all I really need.
Heat:
This unit does produce more heat than my old Yamaha, but much less than my friend's Onkyo (you could fry an egg on that thing!). In a well ventilated AV rack or cabinet it should never be an issue.
Conclusions:
For the price (sub $300 range) there isn't a better option out there as of this review. You could spend a hundred more and get a Pioneer (which does come with an ipod connect wire included in the price) but you're not gaining anything other than a few more connection options. Sound quality wise, this receiver is very, very good. If you can live with the crap remote and a few problems with the GUI, it's well worth the price. I'll probably just get a Harmony remote to make things simple for my family and friends.
4/5 Stars.
Thanks for reading my review. Feel free to ask questions and I'll do my best to answer them in the comments section.

Click Here to see more reviews about: Sony STR-DN1000 7.1-Channel Audio Video Receiver (Black)

The STR-DN1000 7.1 Channel A/V Receiver delivers the Full HD 1080 experience to a home theater system. It features 7 HD inputs including 4 HDMI inputs with "Active Intelligence". In addition, the STR-DH700 is compatible with 24p True Cinema technology video signals and decodes uncompressed audio (LPCM via HDMI) making it compatible with Blu-ray Disc Player, the PlayStation 3 technology and other HD sources. Speaking of an enhanced experience, how about listening to music in a different room? Now share your favorite songs wirelessly throughout your home with ease. Simply plug in the optional S-Air transmitter and turn on the AirStation client (sold separately).

Buy Now

Click here for more information about Sony STR-DN1000 7.1-Channel Audio Video Receiver (Black)

Sunday, February 12, 2012

Argosy HV335T 3.5-Inch HDD 1080P HDMI Mobile Video Media Player Review

Argosy HV335T 3.5-Inch HDD 1080P HDMI Mobile Video Media Player
Average Reviews:

(More customer reviews)
This is the third video multi media player I have ordered in 6 weeks. The first two were a Brite-view and WD live. They didn't cut my picky standards. The Argosy is a solid bug free unit. I have had it for 5 days and really like everything about it except the remote is very directional. It takes a little more hands on but I like that. Install your hard drive in it if you like and its a nice compact unit. To update at the time you copy the firmware off the website onto a flash drive. It doesn't update on it's own off the net maybe that will change but no big deal. This unit can see all the video files you need. It also has a built in cooling fan. I think this will increase the life of the unit. The remote works a lot like a standard DVD player remote if you push stop once on a playback it will resume the next time you hit play. If you hit stop twice it will start from the beginning on next play. It plays all the formates you can throw at it ,yes MKV. There web site has a good PDF manual [...].

Click Here to see more reviews about: Argosy HV335T 3.5-Inch HDD 1080P HDMI Mobile Video Media Player

Argosy HV335T 3.5" HDD 1080P HDMI Mobile Video Media Player

Buy NowGet 22% OFF

Click here for more information about Argosy HV335T 3.5-Inch HDD 1080P HDMI Mobile Video Media Player

Friday, November 11, 2011

Western Digital WD TV Live Network-ready HD Media Player Review

Western Digital WD TV Live Network-ready HD Media Player
Average Reviews:

(More customer reviews)
After much anticipation, WDTV Live is finally here! I'll get right to the point, because I know there are a lot of questions from current Western Digital WD TV HD Media Player owners and those sitting on the fence about the capabilities of the Live in comparison to other media players on the market. I also considered the ASUS O!Play ($99) while waiting for the Live's release or the Seagate FreeAgent Theater+HD ($135). The WDTV is a proven quantity and for the Live, I had high expectations.
Cosmetically, not much has changed. Not even the box. The Live is nearly identical to the WDTV except in color, being matte grey instead of shiny piano black. Ease of setup and usage carries over from its forebear, so WDTV users will be right at home with the Live's interface and settings. At the rear, the ports have been slightly rearranged to make room for a LAN port and component out. HDMI is now 1.3 instead of 1.2, capable of a color depth of 12 bits per pixel. Batteries are included in the box, as are component and composite cables, but bring your own HDMI or LAN cable.
Building on the strengths of the original (and successful) WDTV, WD has made an already excellent player even better. They listened to users and addressed two of the biggest complaints of the WDTV, namely: lack of network connectivity and lack of DTS down-mixing.
I am pleased to report that on these two counts, the Live is a winner, packaged inside the same compact form factor as its predecessor and sold at a very reasonable price. The most exciting thing is network connectivity because the Live can be made wireless!
1) Network connectivity: out of the box, the Live connects via CAT-5. I have no interest in connecting USB hard drives to the Live because it limits my mobility. I have 2 NAS (Network Attached Storage) devices (D-Link DNS321 2-Bay SATA, RAID 0/1 Gigabit Ethernet Port Network Storage Enclosure and D-Link 2-Bay Network Storage Enclosure) and have been streaming movies wirelessly to my PlayStation 3, but I don't like the PS3's lack of MKV support and wasteful energy consumption. My PS3 can now go back to being a dedicated game and Blu-ray machine.
I was surprised to discover that my AirLink 101 AWLL6070 150Mbps 802.11n Wireless LAN USB 2.0 Adapter (purchased for a failed WDTV networking hack attempt) worked. I plugged it in, changed the Live's setting to wireless and it saw my wireless network with no fuss. I really have to hand it to WD for making the device open-ended, unlike the NETGEAR Digital Entertainer Live (Black) (which I tested and returned), which requires a proprietary $40 Netgear dongle. Other dongles will work too with the Live, and WD has a forum listing them.
2) DTS down-mixing: this was another shortcoming of the original WDTV. The Live down-mixes DTS to 2.0 so you don't need to slave it to an audio receiver anymore. Many of my MKV's are encoded with DTS, so this is another huge improvement. DTS Master Audio does not seem to be supported, but I am not very concerned as DTS MA is rarely encountered in the wild (though that may change in the future). All my files are MP3, AAC, AC3, or DTS audio streams, which all work on the Live. Many of the tested MKVs have multiple audio streams for different language tracks. You can also mux additional tracks and subtitles into the MKV file with the free and awesome mkvmerge GUI program. Subtitle files can be downloaded from sites like DivxStation.
DTS downmixing means now I can take a portable drive of movies over to a friend's house and not worry about compatibility, greatly increasing the versatility and value of the Live. The inclusion of both component and composite outs removes the worry about older TV's. And like the WDTV, the Live will downsample to standard def for non-HDTV's. However, if you have an HDTV and an AVR, you'll want to use them for maximum enjoyment.
But the most biggest selling point for me is wireless. After discovering WiFi connectivity, I lost all interest in using the Live as a wired device. With just $20 (cost of AirLink), I now have a wireless player that easily out-competes more expensive ones like the Popcorn Hour A-110 HD Networked Media Tank (EU), and can enjoy the freedom and convenience of putting this player anywhere in my house. I don't have messy and dangerous wires all the floor to trip over (I killed a 1 TB hard drive full of movies this way) and I don't need an audio receiver. All the 720p/1080i/p videos I had on my NAS played perfectly with the except of one 1080p .mp4 which had intermittent hiccups every minute or so.
The Live saw each device 2x on the menu, as a media share and a network share. With media share, the files are divided into 3 categories: video, photos, music. Only some of my movies showed up (WMV, MP4, AVI, TS), no MKV's. With network share, all the files are listed. This is the listing option to use if you have a NAS.
3) Additionally, third complaint on the WDTV was lack of support for 1080p24. This format now plays. VOB is now also supported, for those of you who make DVD archives.
USABILITY:
The WDTV had the most attractive and usable interface of any of the 10+ media players I tested over the years, and WD didn't mess with a winning formula. Graphically, the Live retains the blue cool-toned look and easy-to-use navigation of the WDTV. It adds a third listing option, Preview mode. Movies will now start playing in a smaller window on the right if you pause over the title for a second or two (with audio). Every movie I tested plays in preview. The remote control is the same as the WDTV. Navigation long directories is still somewhat of a pain because of no Page Up/Page Down button, but if you hold the up or down button down, it'll scroll by a page at a time after a second or two. Commands are fast and responsive. No spinning dials that plague the Netgear Live Entertainer.
For rewinding, the preview sometimes does not match the time-code. The timer was counting down, but the screen showed video from the opposite direction. If you stop rewinding and resume again, it'll show the proper preview. This is a small nuisance that I hope WD fixes soon in a firmware update.
Subtitle support via embedded or external still works great for Western and non-Western character sets because of Unicode. Embedded subs are pre-tagged with the language code, so the device will display "Subtitle 1/3 - English". For external .srt files, I discovered that if I name them the same as the movie and include a dash, then the language (e.g. "MOVIENAME - ENG.srt"), the WD will display the part after the dash as the language name.
INTERNET STREAMING:
For YouTube, the videos looked really good. The Live will select HD streams if available. I was surprised at the video quality of some of the ones I loaded, particularly one music video. Startup was fast, if not instantaneous, and I did not notice a buffering delay. Currently, YouTube is the only site supported, and searching is only in Western characters. The onscreen keyboard is arranged in row, A-Z, with 0-9 at the bottom. (Plugging in a USB keyboard did nothing.) I'm hoping for Hulu, Vimeo, and more in the future, like a WDTV Live Channels Guide or something like that, organized by interests (sports, history, science, news, etc), or regions of the world. It would be a very useful feature for people like my dad, who doesn't know how to use the web and he'd be able to watch shows from other parts of the world. Maybe in a future firmware update.
I didn't test Pandora or Live365 (internet radio) because I'm not interested in listening to radio/music out of my TV. Noticeably missing is NetFlix support, a feature prominent on some networked media players, Blu-ray players, and gaming platforms (Xbox 360), though word is that WD is at work on an update.
FINAL THOUGHTS:
Next on my wishlist is RMVB support. This is the last thing missing from the long list of supported formats, because then I can throw out the really crappy RMVB player I have. Sadly, it seems to be hardware related and cannot be added with a firmware refresh.
Lastly, if the Live came in new colors like fire engine red like the Western Digital My Passport Essential 320 GB USB 2.0 Portable Hard Drive WDMER3200TN (Real Red), or banana yellow, that'd be hot. I don't particularly care for the Live's matte grey exterior and prefer the glossy finish of the WDTV. It's not solid grey. It's sparkly like glitter, a rather odd choice for a finish.
To sum up, this is the device you've been waiting for! It is a great little player for the price. It now does everything I want it to (minus RMVB playback) and is truly the versatile and unfettered player that I have been hoping for. As a gadgets guy and early adopter, I wasted several hundreds of dollars testing out disappointing players and can say definitely that WD makes one of the best players on the market.
UPDATE 1: 10/24/09:
1. I logged into Pandora and it worked...Read more›

Click Here to see more reviews about: Western Digital WD TV Live Network-ready HD Media Player

The WD TV Live HD Media Player from Western Digital has everything you need to play your HD media collection and the fun stuff you find on the web in brilliant HD 1080p on your big screen HDTV. Because it supports a wide variety of file types, you can instantly enjoy all your home digital media, regardless of the file format. Plus you get direct access to a huge selection of video, photos, and music from popular internet sites like YouTube, Flickr, Live 365, and Pandora (U.S. only) right from the beautifully easy WDTV navigation screen. The WD TV Live HD media player is exceptionally easy to use so anyone in the family can do it and, because it’s networked, you can easily access media from any PC in the home. Compatibility; HDMI, Full HD (1080p), AAC, MP3, JPEG, USB 2.0, H.264, SimplayHD, Energy Star, Dolby Digital, DTS, DLNA, Bonjour, AVCHD, Windows Vista. Box contains; Media Player, Compact remote with batteries, Composite AV cable, Component AV cable, AC adapter, CD with sample media, Quick Install Guide.

Buy NowGet 30% OFF

Click here for more information about Western Digital WD TV Live Network-ready HD Media Player

Thursday, July 28, 2011

ASUS OPlay - TV HD Media Player (Black) Review

ASUS OPlay - TV HD Media Player (Black)
Average Reviews:

(More customer reviews)
It's not much to look at coming out of the box, but boy, does the O!Play pack a wallop! It's an outstanding first effort from Taiwan-based Asus, a company known more for Eee Netbook and notebook computers than home entertainment devices. With Asus being a newcomer to the media player field and my having tested so many bad players, I was a bit hesitant to order the O!Play, but now I'm a believer. With its exhaustive list of supported video codecs and network connectivity, it is nearly the perfect player, capable of playing everything from VCD to DVD to Blu-ray/HD DVD rips. Most notably, it supports RMVB, an important feature to fans of Asian shows and one that most of the major-brand players lack, including the otherwise superb WD TV HD Media Player and WD TV Live Network-ready HD Media Player. ASUS seems to be very actively developing firmwares and I'm impressed by their diligence.
SETUP:
Setup is easy and literally takes 30 seconds. On the side is 1 USB port and 1 eSATA port to connect local hard drives should you need them. HDMI and optical cable (S/PDIF) are not included, so you'll need your own. I really appreciate Asus using a 2-prong power cord instead of a wall-wart that blocks neighboring outlets. True to Asus's PC pedigree, the AC adapter looks like a PC laptop's AC adapter. It's very small (about the size of a Hostess Twinkie) and has a pleasant (and VERY BRIGHT) blue LED. Upon boot-up, the device asks you to configure it with TV settings, network settings, time and date, etc. After plugging in the LAN cable, it found my NAS units (D-Link DNS321 Gigabit Network Storage Enclosure and D-Link DNS323) right away. The O!Play did have a problem interpreting non-Roman characters on my NAS, so folder names and files got garbled. Some files did not show up on the O!Play until I removed the offending non-Western characters (Chinese and Japanese).
With the new firmware, UPnP has been added, along with some slightly improved icons. With UPnP, the O!Play sees Chinese and Japanese filenames properly, but none of my MKV's showed up, a problem I had on all networked players I've tested. Only a fraction of my total library was listed. If you want to see your entire list, don't use UPnP.
INTERFACE AND USABILITY:
From a total off and unplugged state, the O!Play takes 10 seconds to boot to the home screen, compared to as many as 40 seconds for the Iomega ScreenPlay Plus HD Multimedia Player 1 TB. The home screen is bright and attractive, but the folder navigation scheme leaves a bit to be desired. It's spartan, white text on black, and not nearly as attractive as the WDTV or WDTV Live, but it gets the job done. The remote control is big and solid, though the buttons seem to be bizarrely grouped and scattered about, forcing me to look down each time to make sure I'm pushing the right button. The bottom group of buttons is arranged in a circle around the music button for example, mixing different functionality into one area: volume controls (+/-) with subtitle (Aa), audio track (head icon), repeat mode (circular arrows), picture zoom (magnifying glass), file display mode (Mode), and device setup options (Setup). "Mode" is a file listing filter, toggling between Movies, Music, and Pictures. With it, you never need to go back to the home screen. Unfortunately, there's no "Show All" mode which lists every file together at the same time. To PageUp or PageDown long directories, use the |< and >| buttons.During video or image playback, the picture can be zoomed up to 8x. During video playback, the fast-forward/rewind can go up to 32x. The inclusion of volume control buttons is very thoughtful and useful. You can turn video preview on or off. Pausing over a file for a second will play it in a smaller window on the right (with audio). There is a slight delay of a second or two when reading the file's metadata off a drive or the network, during which time you can't push the play button. This can be a potential problem for people and gets annoying. For music, pausing over the file displays the ID3 info (song name, artist, album name, year, etc).
One cool feature is the ability to adjust the device options while playing back a movie. The menu overlays on top of the movie and you can adjust your settings (Brightness, Contrast, Aspect Ratio, etc) and resume. There's also a Noise Reduction option, but I suggest turning this OFF. It caused strange and distracting frame shimmering in some movies. Lastly, O!Play also remembers where you left off on each movie and can resume the next time you play the file.FORMAT SUPPORT:
This is where the O!Play really shines. It played all of the 100+ random files I threw at it, except for a few stray (and poor quality) .WMV files I got from the internet. MKV, AVI, MPG, DIVX, RM, TS all played flawlessly, both standard def and hi-def 720p/1080i/p content. It even plays Flash Video (FLV), a feature rarely encountered. DTS and Dolby multi-channel audio is downsampled to stereo, so there's no need for an audio receiver if you just want to output through the TV for convenience.
The Asus also plays .IFO/VOB files with DVD chapters, menus, and all disc features as if it were the original DVD. That's great news for users looking to make a centralized DVD collection on a server or a big hard drive. The only problem is there doesn't seem to be a button to get back to the menu. You have to stop the movie and start it again.
For photos, the ASUS has a problem displaying progressive JPEGs. Images will fit to screen and can zoom up to 8x, but there's no 1x view to see it at the original size.
EXTERNAL SUBTITLES:
I tested external .SRTs and internally embedded subtitles in .MKV's in a number of languages, including Chinese, Japanese, Russian, English, French, and others. All worked when saved as UTF-8. For multilingual families and fans of foreign film, this is great news. You can also set the interface to one of 10 major world languages. Subtitle files can be downloaded from sites like DivxStation.
With firmware 1.11, external and internal subs are both recognized if both types co-exist for a movie. Previously, only embedded subs were seen when a movie had both types. Now, pushing the subtitle button pops up a submenu where you can select the subtitle, change its encoding, font size, position, color, and importantly, syncing (many downloaded subtitles are off by a few seconds). This is very useful! No more re-saving. Just cycle through the available encodings or adjust the timing until the sub looks right (but you should still re-save to avoid doing this every time). Where multiple external subs existed, the O!Play did not recognize their names, showing only a number (like "Subtitle: 2 (SRT)", even when named according to the movie's filename (e.g. "Batman.mkv" -> "Batman - English.srt"). Pushing the info button a second time shows extended info like codec, resolution, and bitrate. It is better to mux the subtitle into the file using something like mkvmerge GUI and metatag the language name onto it. Subtitle line-spacing is a bit of an issue (too much). You can change the font size and color, but not the gap. Lastly, I wish for a thick black outline around the text like the WDTV Live. Sometimes the subtitle blends into the movie, no matter what color you set it to.
10/100 NETWORK INTERFACE:
This is a weak point for the device. With no gigabit Ethernet, it is less future-proof against monster 8GB+ .MKV files and other bandwidth intensive HD content. Also lack of wireless connectivity means I do not have freedom to locate this device wherever I want.
FINAL THOUGHTS:
The O!Play is truly a multimedia beast. It plays nearly everything under the sun and as a WDTV and WDTV live owner, I can safely say that Western Digital has some serious competition here. At $99, it is a very capable device at a fantastic value, and its homely interface is forgivable. It is, however, rather boxy and brick-like, taking up as much space as a 3.5" external hard drive or an average Bible. It's 2x the size of the WDTV. Lastly, WDTV Live has Flickr, YouTube, and Pandora streaming. O!Play has no internet playback capabilities as of the current firmware release, though that can quickly change. ASUS has already added substantial improvements like the subtitle fixes and UPnP.
If wireless connectivity could be added with a firmware update, then this player will be all things to all people. (WDTV Live supports third party WiFi dongles). This is THE player to get if you want MKV, RMVB, and DVD .IFO support and don't care about wireless. Great value coupled with a great firmware support attitude makes this a highly recommended buy, and I hope ASUS surprises us with more software features down the road.UPDATE #1: Dec 10/09: Firmware 1.17 is now available, which adds BD .iso support and lets you jump forward by 5/10/15/30 mins.
UPDATE #2: Feb 15/10: Firmware 1.21 has just been released. It adds MAJOR internet content connectivity as well as the option to wirelessly connect your R1! This is something users have been clamoring for since this product's release and a giant leap forward. With a compatible USB dongle, this thing does everything the Air does, except the media...Read more›

Click Here to see more reviews about: ASUS OPlay - TV HD Media Player (Black)

ASUS O!Play is the most convenient way access your media files on your TV. This device is easy to use and highly compatible with many video and audio formats. Equipped with an eSATA, USB, and LAN port, you can access your files from an external hard drive, PC, or NAS. The O!Play even supports HDMI so you can display your content in 1080p.

Buy NowGet 3% OFF

Click here for more information about ASUS OPlay - TV HD Media Player (Black)

Friday, March 11, 2011

Samsung BD-C7900 1080p 3D Blu-ray Disc Player Review

Samsung BD-C7900 1080p 3D Blu-ray Disc Player
Average Reviews:

(More customer reviews)
I upgraded from the Samsung 6900...which was exactly the same as the 7900 except the 7900 has two HDMI outputs...1 HDMI (video/audio) and 1 HDMI (audio). The 6900 does have 7.1 analog outputs that way the blu-ray player does the decoding for all the HD audio formats...but since my Onkyo receiver also decodes HD audio I wanted to having the settings at BITSTREAM (AUDIOPHILE). My receiver is 1.3 HDMI compatible but not 1.4 HDMI (3D ready) so I send HDMI (video/audio) to my 3D tv and the other HDMI (audio) to my receiver...the sound is INCREDIBLE. I love all the wireless features this blu-ray player has...netflix, pandora, blockbuster, and many more. Very easy to set up and use. I highly recommend both the Samsung 6900 and even more so the 7900 because of the two HDMI outputs. I have had NO problems at all with either blu-ray player. The picture quality and audio are top notch...PERFECTION!!!

Click Here to see more reviews about: Samsung BD-C7900 1080p 3D Blu-ray Disc Player


3D Technology Checklist
This product is 3D-related. To help you get a great 3D experience, use our checklist below to ensure that you have everything you need. If you have any questions or want to learn more about 3D, we invite you to visit 3D 101--our center for everything 3D. To get started with 3D, please ensure that you have:
If you want to get more information about 3D, shop our 3D products, watch videos, or interact with other customers, visit 3D 101, our customer center about everything 3D.

Buy Now

Click here for more information about Samsung BD-C7900 1080p 3D Blu-ray Disc Player