NETGEAR 5 GHz Wireless-N HD Access Point/Bridge (WNHDE111) Review

Average Reviews:

(More customer reviews)Old Setup
Netgear WGT624NAv3 (G - 108Mbs)
Netgear WGPS606 (Print Server/Bridge 54 Mbs)
New Setup
Netgear Rangemax WNDR3700
Netgear WNHDEB111
Background:
I honestly hated Netgear. The nightmares I had with my old setup were terrible. I constantly had to reboot the router; the bridge required me to reconnect wireless devices in a certain order every time; my fiance's Apple never stayed connected long; bittorrent, VPN and video streaming knocked the router out the few times it was working; and the customer service is just horrible. I swore I'd never buy another Netgear product, but I finally had to buy something that would at least work for my fiance. I waited a few months for 802.11n to mature a bit, and was going to get the DLINK DIR-655. Recently it's had horrible firmware issues though and the other brands had low reviews. Then along came the WNDR3700.
The reviews were great so I picked it up and this bridge. I fully expected it to work as badly as my previous Netgear products, but I felt I had to give it a shot.
Conclusion:
I've had this product connected to my WNDR3700 for two days now and it works flawlessly. I have had many wireless setups and this is the best I've ever seen. I've seen people complain that it's on the 5Ghz frequency only, but it works great. All of my other systems are wired or on the 2.4Ghz frequency so I have very little overlap. Of course the WNDR3700 is dual-band so that may not be the same for everyone. I will update this if anything changes but for now I'm extremely happy. It could work at half the speed it does and I would still be happy to have something that just works for once.
Update:
Everyone in my home has problems with the iphone and this router. We constantly get disconnected. It's a known issue on their forums. There is a recent update that helps a lot but almost everyday I still lose my connection and have to re-enter my password. Otherwise this router is still working amazingly. I've only had to reset it one time.
Update:
The last update pretty much fixed the iphone issues. I rarely have to reconnect my phone anymore. If you plan on using the USB storage part of the device though I'd recommend reading the Netgear forums. Some people have had some issues with this.

Click Here to see more reviews about: NETGEAR 5 GHz Wireless-N HD Access Point/Bridge (WNHDE111)

The NETGEAR WNHDE111 5 GHz Wireless-N HD Access Point/Bridge lets you create a 5 GHz Wireless-N access point by simply connecting it to an existing router/gateway. The resulting wireless network lets you transfer data at the highest possible Wireless-N speeds, making it an ideal solution for network gaming and streaming HD videos. By utilizing patented metamaterial antenna technology, the WNHDE111 offers a speed and range far surpassing the older Wireless-G standard.
Easy Setup Simply connect the WNHDE111 to your router/gateway. Setup is easily and securely done with a simple "Push 'N Connect" feature using Wi-Fi Protected Setup (WPS), which eliminates the need to remember or input security password keys. The device automatically configures itself to access point or bridge mode depending on the type of Ethernet enabled device it connects to.
You can easily extend your wireless network by purchasing more WNHDE111 units, or start with the NETGEAR HD/Gaming 5 GHz Wireless-N Networking Kit.
Minimal Interference = Outstanding Performance Most wireless devices today, such as Wi-Fi devices, cordless phones, Bluetooth devices, microwaves, and baby monitors, operate on the 2.4 GHz frequency, creating a lot of traffic and interference. The WNHDE111, however, operates on the 5 GHz band, which has up to 23 free channels and avoids the interference from most other devices.
The WNHDE111 complies with the latest Wireless-N draft specification for the fastest possible Wireless-N speeds. Automatic Quality of Service (QoS) ensures prioritization of voice, video and gaming traffic. It also supports wireless "ad-hoc" mode for wireless LAN peer-to-peer gaming and supports multicast point-to-multi-point HD video streaming.
The WNHDE111 supports WiFi Protected Access (WPA2-PSK, WPA-PSK), and 64-bit and 128-bit WEP encryption and is backed by a 1-year warranty.
What's in the Box WNHDE111 5 GHz Wireless-N HD Access Point/Bridge, stand, Ethernet cable, setup CD, power adapter, and warranty/support information card.

Click here for more information about NETGEAR 5 GHz Wireless-N HD Access Point/Bridge (WNHDE111)

TRENDnet 300Mbps Wireless N Access Point TEW-638APB (Black) Review

Average Reviews:

(More customer reviews)Home networking can be a real pain especially for someone like me who knows enough to be dangerous but not enough to be a network installer. I have a wireless router burried in my basement that wasn't getting signal to my upstairs part of the house. I tried two other different products 1) two routers connected to each other and 2) a Hawking repeater. I ended up wasting a lot of time with them and they just didnt work or had compatibility issues. I took a plunge on the no brand trendnet based on this other positive review and he was 100% right. The price is 50% cheaper than the comparable Linksys N switch and does exactly as advertised. Setup took 5 minutes and I now have coverage all over my house. No issues so far.

Click Here to see more reviews about: TRENDnet 300Mbps Wireless N Access Point TEW-638APB (Black)

TRENDnet 300Mbps Wireless N Access Point TEW-638APB Wireless Access Points

Get 56% OFF

Click here for more information about TRENDnet 300Mbps Wireless N Access Point TEW-638APB (Black)

NETGEAR WG602 54 Mbps 802.11g Wireless Access Point Review

Average Reviews:

(More customer reviews)I bought this item, because, on the back of the box, it shows the WG602 being used as a bridge to connect to a WGT624 access point. This is extremely misleading, and well, plain wrong, as a couple of other reviewers have pointed out. I was on the phone with extremely unhelpful tech support (that they outsourced to India, I believe), and it took several hours of run-around for the support guy to actually admit that the two products are not compatible (he had to ask someone else). Had he researched this properly in the beginning, hours would have been saved. I was eventually informed (after being told to upgrade firware, change numerous settings, etc.) that the WG602 would only bridge to another WG602. THE BACK OF THE BOX IS WRONG! Don't buy this if you're looking for a bridge that's compatible with any other AP.

Click Here to see more reviews about: NETGEAR WG602 54 Mbps 802.11g Wireless Access Point

The NETGEAR WG602 54 Mbps 802.11g Wireless Access Point lets you easily set up a wireless network in your home so you can share a single internet connection with everyone in your household at speeds up to 54 Mbps. Note that to share an internet connection you will need a router into which you can plug the WG602 access point. If you do not have a router, consider NETGEAR’s Wireless-G Router WGR614."
Easy Setup The WG602 makes it easy for even a novice to set up a wireless network: just plug the included Ethernet cable from your LAN into the device and insert the included CD into any computer on the network, which will provide step-by-step instructions. The WG602 offers a myriad of placement options by including a stand for vertical placement and slots on the bottom for mounting on a wall or ceiling. The default 2 dBi omnidirectional antenna can be removed and you can install an external antenna most suited for your needs onto the standard SMA connector.
The WG602 employs a web-based interface for configuration, allowing you to adjust settings such as the beacon interval, RTS threshold, and DTIM interval. The firmware is also upgradeable via the web interface so you can be sure your access point will always be up-to-date.
Fast and Secure Supporting the 802.11g standard, the NETGEAR WG602 offers data speeds of up to 54 Mbps, making it possible to share a broadband internet connection, stream music without hiccups, watch videos with less load time, and videoconference without problems. Downloading files is up to five times faster than it was with 802.11b. If you still have computers that use 802.11b, don't fret as the access point is backwards compatible with the older wireless standard and can be set so all your computers can connect to the network and the WG602 will automatically figure out the connection type and work accordingly.
The WG602 offers many security options to ensure your data is private. Both 40/64-bit and 128-bit WEP encryption is available, as well as Wi-Fi Protected Access (WPA2-PSK). You can also use MAC address authentication to allow only authorized users onto the network.
Bridge and Repeater Mode In addition to functioning as an access point, the WG602 can also be used as a bridge and as a repeater. Used as a bridge, the device allows you to connect two LANS wirelessly; as a repeater, your wireless signal's range is extended so even the remote corners of your home or office can be covered.
The NETGEAR WG602 54 Mbps Wireless Access Point is backed by a 1-year warranty.
What's in the Box WG602 54 Mbps Wireless Access Point, vertical stand, power adapter, Ethernet cable, resource CD, user's guide, warranty/support information card.

Get 29% OFF

Click here for more information about NETGEAR WG602 54 Mbps 802.11g Wireless Access Point

ZyXEL WAP3205 Wireless N access point, Ethernet client, and universal repeater Review

Average Reviews:

(More customer reviews)Once you have it setup it works flawlessy. Problem is setting it up for the first time. Documentation is not user friendly to the non-tech savvy. I'm using it as a wireless bridge / access point with my Sony blue-ray player. I already have a Linksys wireless router using WEP encryption (forced to use this because my XBOX 360 doesn't support WPA). To make it easy for others doing the same thing use the following steps:
1. Change your pc or laptop's ethernet adapter's IP address to 192.168.1.3 To do this on Vista or Windows 7 you open you network sharing center then you open your ethernet LAN adapter settings (or manage network connections in Vista). Select the Internet protocol v4 (IPv4) and go into properties. Manually put in the IP address with subnet mask of 255.255.255.0 and don't worry about the gateway address.
2. Connect your WAP3205 to your pc/laptop with the ethernet cable that is provided. Of course make sure you plugged in the power to it or your going nowhere. Open up your preferred browser (IE, firefox, netscape, etc.) and then type in the address bar 192.168.1.2 and now you will be connected to the WAP3205. Type in the default password of 1234, you are now prompted to change your password to whatever you want it to be.
3. Now that your in the WAP3205 click on Expert Mode. When in this mode on the far left you will see Status and below it Monitor, Configuration and Maintenance. Click on Maintenance and then hit the plus sign in front of Maintenance once you are in. Go to the last option of Sys OP Mode then select Client Mode and hit apply.
4. Go back to the far left and hit configuration then go to Wireless LAN. You will see tabs for Profile, Site Survey and WPS. Hit the Profile tab and then hit the Add button. Type in your network name / SSID and then select your security drop down box. Select WEP if you have a setup like me with the XBOX 360 or if you don't care about security select the no security option. Type in your passphrase that you use for your router's security or the actual 128 bit security code (or 64 bit if that is what you use) and hit apply. Then select your newly created profile and hit the activate button. If it's configured correctly you will get a green check. Now your done on this end.
5. Disconnect your WAP3205 from your pc/laptop and change your pc or laptop's ethernet adapter settings back to whatever it was before.
6. Go to your blue-ray player and disconnect the power cord for about a minute or more. Connect the WAP3205 to the blue-ray player with the ethernet connection and power your blue-ray player back on. The blue-ray player will automatically pick up the network settings from the WAP3205 and you will be done.
Hope this is helpful and if you don't have an XBOX 360 or if you use WPA for security the setup should be easier.
So far so good with the Zyxel WAP3205...I had used the Linksys WET610N (2 separate units) and they both failed. The first one worked a couple of days before the wireless stopped working and the second one's wireless failed right out of the box. The WET610N's are way easier to configure but they are too expensive and for me totally unrealiable. The WAP3205 is a steal and worth the effort when you consider the rock solid connection I have now, besides it was less than half the price of the Linksys. It's not as nice looking as the Linksys that's for sure but the main thing is it works as described.

Click Here to see more reviews about: ZyXEL WAP3205 Wireless N access point, Ethernet client, and universal repeater

WAP3205 is more than just another 300Mbps access point; it's a multifunction 11n tool that can be used in a variety of scenarios.In addition to Access Point mode, it can also be a Universal Wireless Repeater, extending the range of your existing network.Unlike other repeaters, the WAP3205's extender mode works with the latest WPA/WPA2 security technologies, so security doesn't have to suffer when extending your network.The WAP3205 also has the ability to function as a wireless bridge, allowing you to connect non-wireless network compatible devices to your existing network.Simply plug in your Ethernet based TIVO, Smart TV, Blue Ray player, network storage device (NAS), or game system into the WAP3205, and it can now join your wireless network.No software or drivers to be installed. With an 11n compatible data transfer rate of up to 300Mbps*, which is 6 times faster than 11g, you can enjoy high-speed network connection and high-definition video streaming with no jitters or dropped calls.It also works with your existing 802.11b and 802.11g network devices. Some wired devices such as modems, set-top boxes, digital media adapters and storage devices might not be natively wireless capable. In order to connect these without additional wiring, driver installation or configuration, just plug the Ethernet cable into the WAP3205 and connect to another wired device to get connected wirelessly. With the built-in Universal Repeater mode, WAP3205 can connect to most popular access points or wireless routers while simultaneously acting as an access point to provide wireless connectivity to all other wireless devices such as notebooks. In other words, WAP3205 can extend the wireless coverage to the entire home premise and enable all wireless devices to link to the existing networkthis is especially helpful for larger home environments.Since this is all done wirelessly, there’s no need to run additional Ethernet cables to extend your network

Get 9% OFF

Click here for more information about ZyXEL WAP3205 Wireless N access point, Ethernet client, and universal repeater