Average Reviews:
(More customer reviews)I bought this item, because, on the back of the box, it shows the WG602 being used as a bridge to connect to a WGT624 access point. This is extremely misleading, and well, plain wrong, as a couple of other reviewers have pointed out. I was on the phone with extremely unhelpful tech support (that they outsourced to India, I believe), and it took several hours of run-around for the support guy to actually admit that the two products are not compatible (he had to ask someone else). Had he researched this properly in the beginning, hours would have been saved. I was eventually informed (after being told to upgrade firware, change numerous settings, etc.) that the WG602 would only bridge to another WG602. THE BACK OF THE BOX IS WRONG! Don't buy this if you're looking for a bridge that's compatible with any other AP.
Click Here to see more reviews about:
NETGEAR WG602 54 Mbps 802.11g Wireless Access PointThe NETGEAR WG602 54 Mbps 802.11g Wireless Access Point lets you easily set up a wireless network in your home so you can share a single internet connection with everyone in your household at speeds up to 54 Mbps. Note that to share an internet connection you will need a router into which you can plug the WG602 access point. If you do not have a router, consider NETGEAR’s Wireless-G Router WGR614."
Easy Setup The WG602 makes it easy for even a novice to set up a wireless network: just plug the included Ethernet cable from your LAN into the device and insert the included CD into any computer on the network, which will provide step-by-step instructions. The WG602 offers a myriad of placement options by including a stand for vertical placement and slots on the bottom for mounting on a wall or ceiling. The default 2 dBi omnidirectional antenna can be removed and you can install an external antenna most suited for your needs onto the standard SMA connector.
The WG602 employs a web-based interface for configuration, allowing you to adjust settings such as the beacon interval, RTS threshold, and DTIM interval. The firmware is also upgradeable via the web interface so you can be sure your access point will always be up-to-date.
Fast and Secure Supporting the 802.11g standard, the NETGEAR WG602 offers data speeds of up to 54 Mbps, making it possible to share a broadband internet connection, stream music without hiccups, watch videos with less load time, and videoconference without problems. Downloading files is up to five times faster than it was with 802.11b. If you still have computers that use 802.11b, don't fret as the access point is backwards compatible with the older wireless standard and can be set so all your computers can connect to the network and the WG602 will automatically figure out the connection type and work accordingly.
The WG602 offers many security options to ensure your data is private. Both 40/64-bit and 128-bit WEP encryption is available, as well as Wi-Fi Protected Access (WPA2-PSK). You can also use MAC address authentication to allow only authorized users onto the network.
Bridge and Repeater Mode In addition to functioning as an access point, the WG602 can also be used as a bridge and as a repeater. Used as a bridge, the device allows you to connect two LANS wirelessly; as a repeater, your wireless signal's range is extended so even the remote corners of your home or office can be covered.
The NETGEAR WG602 54 Mbps Wireless Access Point is backed by a 1-year warranty.
What's in the Box WG602 54 Mbps Wireless Access Point, vertical stand, power adapter, Ethernet cable, resource CD, user's guide, warranty/support information card.
Get 29% OFF
Click here for more information about NETGEAR WG602 54 Mbps 802.11g Wireless Access Point
