Average Reviews:
(More customer reviews)Bought two. Plugged in one in my home office with a Cat5 coming from my WRT54G router.
Plugged the other one in on the opposite side of my ranch townhome. Got the blue light sync indicator within 5 seconds. Plugged in my laptop and got an IP from the Linksys five seconds after that..
Works perfectly. No drops. Just like an ethernet cable would be. Since it has four ports, plugged in the Tivo via the USB/Ethernet I already had. That also grabbed an IP and worked perfectly.
Consistent speed of copying WinXP SP2 off my PC in my home office to my laptop in the living room using the two 104s is about 15 Mbps or so as measured by Netstat on my laptop. Is it equal to Cat5? Is it ANYWHERE NEAR 85 Mbps as Netgear advertises? NOT A CHANCE. Connecting the laptop to my LAN by directly connecting into the WRT54G resulted in the same file being moved from the same PC at just over 75 Mbps. So, the 15 Mbps speed of the 104s is about 20% of the LAN's speed moving the same file.
The Netgear software says the two are connected at just about 40 Mbps. So, figure less than half that in real speed.
But overall, it does work. It's more than enough speed for me to avoid the hassles and drops of wireless, not to mention having to use WEP since my Tivo can't currently support WPA.
Clearly, this is a YMMV product. Buy it and take the shot. You might get enough speed. Or you may not even have it sync up. That's why I bought it from Amazon so I could return it if I had too. Could have gotten it a bit cheaper elsewhere, but why risk it?
If I was streaming HD files, it wouldn't work. But for not having to deal with cutting through 19 (!) wireless networks that my 802.XX Site Monitor can see, and fighting the inevitable XP wireless drops, it works fine for me. I was going to go for the Slinglink first but figured I might as well try for faster speeds. I'm glad I spent the extra $$$$ over it and the older Netgear 102s.
5 stars for ease of use. 1 star for the laughable real speed versus Netgear's advertising. Thus, an average of 3 stars.
EDIT TO ORIGINAL REVIEW: I have `SBC/ATT/Whatever they are today' DSL. I tweaked my RCP Receive Window (RWIN) from blank (whoopps) to 17,424 (as well as other settings) per DSLReports.com's suggestion in order to accommodate the new 6.0/764 RT based speed profile I recently received. In doing do, the speed of file transfers referenced above via the 104 dropped from about 15 megs to less than 10. When I removed the RWIN setting restoring it to its state before messing with it, the speed returned to the 15 megs.
So, if you've tweaked your registry settings for maximum broadband download speed and are not getting great results with the 104, you might want to do a little tweaking trade off between the two to get the speeds you're seeking on both the 104 and your broadband access. My results of both speeds is still in 'messing around with' mode and I haven't yet found that perfect blend.
EDIT TO ORIGINAL REVIEW #2 - 06/11/2006: Still working fine. Speeds are consistent with what I originally posted. It's never failed once to work the way it's intended. I've never dropped an IP and I've never plugged in the laptop and not had it work within a few seconds. A good product in my specific enviornment. I'll buy another one so I can plug in the laptop anywhere in my place, even the deck outside and not have to fight wireless drops. Now if they'd only release the 1.6 firmware....
Click Here to see more reviews about: NETGEAR XE104 85 Mbps Powerline 4-Port Ethernet Adapter
The NETGEAR XE104 85 Mbps Powerline 4-Port Ethernet Adapter lets you easily extend a network using just the existing electric lines of your home, eliminating the need to run unsightly Ethernet wires all over your house or apartment. With four ports, you can connect multiple devices to one adapter and at 85 Mbps, you'll have more than enough speed to download music, stream videos, and make internet telephone calls without any hiccups.
True Plug and Play Installation Extending a network using the electric lines in your home requires an XE104 unit and an additional NETGEAR XE103 Powerline Ethernet Adapter. Simply plug the XE103 into a wall outlet and connect it to your router with an Ethernet cord. Then plug the XE104 into the wall outlet where you need a network connection and connect it to as many as four Ethernet-ready devices. That's it. There's no software to install. You can create as many network connections as you need by connecting more XE104 or XE103 units wherever you need them. The device has easy-to-read icon LEDs for status information at a glance.
Fast Performance The XE104 is HomePlug compatible and supports speeds up to 85 Mbps which is enough for multiple video streams without interruptions. The XE104 has four 10/100 Ethernet ports with which you can connect a PC, gaming console, Slingbox, DVR, NETGEAR's SC101T Storage Central Turbo or ReadyNAS NV+, or another networkable device. In order to enable encryption, you need a computer with Windows Vista, XP, 2000, 98 or Me.
The NETGEAR XE104 85 Mbps Powerline 4-Port Ethernet Adapter is backed by 1-year warranty.
What's in the Box XE104 85 Mbps Powerline 4-Port Ethernet Adapter, installation guide, Ethernet cable, resource CD, warranty card, and support and information card.
Get 33% OFF
Click here for more information about NETGEAR XE104 85 Mbps Powerline 4-Port Ethernet Adapter
0 comments:
Post a Comment