Average Reviews:
(More customer reviews)OK so I am one of the many who were waiting for this player for one big reason. I have expensive audio components and didn't want to replace them just to get HDMI input for True HD and DTS Master Audio. Now that I own it I can positively confirm that this player decodes both of the Hi-Def audio formats internally and sends them to the analog outputs... and OH MY what a huge difference over AC-3 or DTS!! The most noticeable thing is the ambient sound that is lost in compression. Watched 5th Element last night and the beginning of the movie starts with this echoing reverberation during the credits. In AC3 it sounds like an echo, but in TrueHD it's all filled in with a very deep sound field and detailed ambient sound. The overall impression is sound that is much fuller and balanced. It also has a nice feature called Dialog Enhancer which bumps the volume of dialog in soundtracks so you can hear the dialog when listning at low volume levels (so your spouse can sleep...feelin' me?). In 2 words - Worth it!
Next the features and a bonus for older Mitsu owners. I have a Mitsubishi WD-62628 1080P DLP TV. This unit was one of the first 1080P TV's made. They did not have the video processing capability at the time to take a 1080P input. So it's max input on the main HDMI connector or component video is 1080i and the TV upconverts to 1080P. This has left owners of this family of TV's with a quandary in that they want to see movies from their Blu-Ray player in 1080P not 1080i. There have been rumors that you can use the HDMI-2 input for native 1080P input if you tell the TV that a computer is connected. Well I can confirm that this actually works just fine !! You set the Net Command to enable HDMI-2 and that a PC is what is on that input. Disable the audio part (if you are going to use the analog outputs from the Panny like me) and then tell the blu-ray player to output at 1080P (rather than auto-detect). The TV will momentarily display a message that the video signal is non-standard, but will then display it anyway. So I get HD audio and 1080P video with my older TV and non-HDMI audio processor!! Bonus #2 is that this Panny player also has picture controls for brightness, contrast, gamma, color, and black level so you can tweak the picture if necessary. It also has canned settings (normal, cinema and 2 others). I find that movies look best in Cinema. It deepens the color and seems to provide better color spectrum.
I hope this answers the questions for a bunch of you that are still sitting on the wall. This one finally does it all, A/V wise. I have not hooked it up to the LAN yet for BD-Live functions. That was not a big part of my plan for this but will happen shortly.
Happy viewing!
Post Review Note: One thing I have discovered is that the picture controls on the BD50 don't offer as much adjustment as the controls on a TV. The straight 1080P input is a little on the bright side. I found that the BD50 will not enable 1080i component video and HDMI at the same time, it's one or the other. Once you turn on HDMI, it drops the component video to standard def no matter what you set it on. This means I can't look at upconverted 1080i (via component video) with full picture controls vs 1080p on HDMI-2 with the minimal controls offered by the BD50 without stopping the movie and re-starting it... Jury is still out on this one.
Click Here to see more reviews about: Panasonic DMP-BD50K 1080p Blu-Ray Disc Player
PANASONIC DMP-BD50K BLU-RAY DISC(TM) PLAYER1080P OUTPUT: 24P(FOR BD-ROM ONLY)/60P ;3:2/2:2 PULL-DOWN PROGRESSIVE PROCESSING ;UP-CONVERSION TO 1080P; 148.5MHZ/12BIT VIDEO CONVERSION; PROGRESSIVE SCAN ; DIGITAL NOISE REDUCTION ; DOLBY(R) DIGITAL PLUS, DOLBY(R) TRUEHD ; DTS(R)-HD ; DIALOGUE ENHANCER; DYNAMIC RANGE COMPRESSION ;HDMI(TM) V1.3 WITH DEEP COLOR(TM); COMPONENT & S-VIDEO OUTPUTS; DIGITAL AUDIO OUT ; SECURE DIGITAL CARD(R) SLOT; ETHERNET PORT; INCLUDES REMOTE
Click here for more information about Panasonic DMP-BD50K 1080p Blu-Ray Disc Player
0 comments:
Post a Comment